|
Cat No |
Description |
Suitable Use |
Dimensions |
|
FPA-271
|
XP95® isolator
|
Detects short circuit faults on XP95® loops
|
Ø100mm x 35mmH
|
|
FPA-277
|
XP95® 24V intelligent input/output unit
|
To report fault, switch open and switch closed levels
|
150mmW x 90mmH x 48mmD
|
|
FPA-278
|
XP95® 230V intelligent mains switching input/output unit
|
To supervise one or more normally open switches
|
150mmW x 90mmH x 48mmD
|
|
FPA-279
|
XP95® sounder control unit c/w isolator and back box
|
To control the operation of a zone of sounders
|
150mmW x 90mmH x 48mmD
|
|
FPA-281
|
XP95® zone monitor c/w isolator and back box
|
Controls the operation of up to 20 conventional detectors from a loop
|
150mmW x 90mmH x 48mmD
|
|
FPA-282
|
XP95® intelligent switch monitor
|
Monitors one or more single pole Volt-free contacts
|
150mmW x 90mmH x 48mmD
|
|
FPA-284
|
XP95® mini switch monitor with isolator and interrupt
|
Monitors equipment where a fast response is required
|
39mmW x 39mmH x 20mmD
|
|
FPA-561
|
XP95® 5A DIN-rail sounder controller
|
Controls the operation of a zone of externally powered sounders
|
110mmW x 107mmH x 20mmD
|
|
FPA-567
|
XP95® DIN-rail input/output unit
|
Provides supervision of one or more normally open volt free contacts connected to a single pair of cables and a set of changeover relay output contacts
|
33mmH x 102mmW x 33mmD
|
|
FPA-568
|
XP95® intelligent DIN-rail switch monitor
|
Monitors the state of one or more single pole, Volt-free contacts connected on a single pair of cables and reports the status
|
33mmH x 102mmW x 33mmD
|
|
FPA-569
|
XP95® DIN-rail mains switching input/output unit
|
Provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input
|
107mmW x 110mmH x 20mmD
|
|
FPA-573
|
XP95® DIN-rail zone monitor with isolator
|
Powers and controls a zone of up to 20 conventional detectors in an XP95 loop
|
107mmW x 110mmH x 20mmD
|
|
FPA-872
|
XP95® DIN-rail interface enclosure (4 unit capacity)
|
Houses up to 4 XP95® DIN-rail mounted interfaces
|
150mmH x 125mmW x 180mmD
|
|
FPA-901
|
XP95® DIN-rail interface enclosure (10 unit capacity)
|
Houses up to 10 XP95® DIN-rail mounted interfaces
|
150mmH x 180mmW x 225mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-271
XP95® isolator
Detects short circuit faults on XP95® loops
Ø100mm x 35mmH
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-277
XP95® 24V intelligent input/output unit
To report fault, switch open and switch closed levels
150mmW x 90mmH x 48mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-278
XP95® 230V intelligent mains switching input/output unit
To supervise one or more normally open switches
150mmW x 90mmH x 48mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-279
XP95® sounder control unit c/w isolator and back box
To control the operation of a zone of sounders
150mmW x 90mmH x 48mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-281
XP95® zone monitor c/w isolator and back box
Controls the operation of up to 20 conventional detectors from a loop
150mmW x 90mmH x 48mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-282
XP95® intelligent switch monitor
Monitors one or more single pole Volt-free contacts
150mmW x 90mmH x 48mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-284
XP95® mini switch monitor with isolator and interrupt
Monitors equipment where a fast response is required
39mmW x 39mmH x 20mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-561
XP95® 5A DIN-rail sounder controller
Controls the operation of a zone of externally powered sounders
110mmW x 107mmH x 20mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-567
XP95® DIN-rail input/output unit
Provides supervision of one or more normally open volt free contacts connected to a single pair of cables and a set of changeover relay output contacts
33mmH x 102mmW x 33mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-568
XP95® intelligent DIN-rail switch monitor
Monitors the state of one or more single pole, Volt-free contacts connected on a single pair of cables and reports the status
33mmH x 102mmW x 33mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-569
XP95® DIN-rail mains switching input/output unit
Provides a mains-rated voltage-free, single pole change-over relay output and a monitored switch input
107mmW x 110mmH x 20mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-573
XP95® DIN-rail zone monitor with isolator
Powers and controls a zone of up to 20 conventional detectors in an XP95 loop
107mmW x 110mmH x 20mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-872
XP95® DIN-rail interface enclosure (4 unit capacity)
Houses up to 4 XP95® DIN-rail mounted interfaces
150mmH x 125mmW x 180mmD
|
|
Cat No
Description
Suitable Use
Dimensions
|
FPA-901
XP95® DIN-rail interface enclosure (10 unit capacity)
Houses up to 10 XP95® DIN-rail mounted interfaces
150mmH x 180mmW x 225mmD
|