|
We
have introduced a range of products designed to exploit the
significant advantages that the new generation of high power
white light emitting diodes (LED's) offer. |
|||||
 |
Combined
electronic parallel LED driver and emergency module, suitable for non-maintained
and maintained 3 hour operation |
 |
|||
|
Supplies
into 6W of output at 4 Volts D.C. |
||||
|
Can be
used for Nickel Cadmium or Nickel Metal Hydride cells in a variety of
capacities dependant on the duration and load requirements |
||||
|
Easy selection of charge outputs | ||||
|
Load | 3 hour battery | |||
| 1W | 3x0.7Ah cells | ||||
| 3W | 3x1.5 Ah cells | ||||
| 5W | 3x4 Ah cells | ||||
|
Maintained
output can be switched via a separate input terminal |
||||
|
Electronics
are suitable for a wide operating temperature range of -40°C to +50°C
(not including batteries) |
||||
|
Lightweight
and compact size polycarbonate case provides designers with a large degree
of flexibility. Dimensions: L130mm x W50mm x H30mm fixing centres 120mm |
||||
|
Short circuit and battery polarity protected | ||||
|
All designed
to comply with EN55015 and relevant clauses of EN60924 |
||||
 |
|||||
|
High output
parallel LED driver supplying loads up to 8 Watts at 4 Volts a (limiting
resistor should be included with the LED array) |
||||
|
Suitable
for 230V ±6% 50Hz (other supply voltages available to order) |
||||
|
Housed
in a polycarbonate case with dimension of L130mm x W50mm x H30mm fixing
centres at 120mm |
||||
|
Designed to comply with EN55015 | ||||
 |
||||
The
DRM415AC relay module is an enclosed change-over relay for use with
static inverter operated emergency lighting systems and is rated at
1250VA |
||||
The
DRM415AC can be used with either maintained or non-maintained luminaires,
powered from a static inverter and provides local sub circuit monitoring
to comply with the European Standard for centrally supplied emergency
systems, EN50171 |
||||
For
non-maintained operation, the switched supply is also connected to
the DRM415AC. This allows the luminaire to be switched on and off as
though it were a normal mains luminaire. In the event of the local
un-switched supply failing the luminaire is operated from the static
inverter supply, regardless of whether the luminaire was being operated
from the normal mains supply at the time. |
||||
For
maintained operation, the switched supply is also connected to the
DRM415AC. This allows the luminaire to be switched on and off as though
it were a normal mains luminaire. In the event of the local un-switched
supply failing the luminaire is operated from the static inverter supply,
regardless of whether the luminaire was being operated from the normal
mains supply at the time. |
||||
| A number of different options based upon the DRM415AC are available | ||||
| DRM415AC: | Static inverter changeover relay rated at 1250VA | |||
| DRM415AC/NR: | As above,
with neon indicator showing that the static inverter supply is present
and healthy |
|||
| DRM415AC/RB: | Static
inverter change over relay housed with in a sheet metal box for remote
mounting |
|||
| DRM415AC/RB/NR: | As above
except with neon indicator showing that the static inverter supply is
present and healthy |
|||
| DRM415AC/ADD | Addressable remote box incorporating OEL305 | |||
| All of the above products can be factory fitted within "free issued" luminaires contact our sales office for information | ||||
 |
luminaire emergency li
luminaire emergency lighting ballast exit sign
orbik spel fire central battery gear detection pcb can baton freznel ip65
ip52 ip50 ip20 ip25 maintained uk UK