| Appropriate for Protecting Buildings with Large or High Ceilings |
 |
A Range of Conventional beam smoke detectors consisting of wall mounted transceivers and reflectors. Beam smoke detectors are ideal for use in large areas including warehouses, halls and factories where conventional point detection is not appropriate. Simple to install and commission, the compact and aesthetically pleasing design of the optical beam detectors ensure that they can be fitted in areas where architectural considerations are required. |
| Features | |
 |
Operates from 15 to 32 Volts dc with a low current consumption |
|
Easy to install and commission |
|
4 x fixed sensitivity/threshold levels |
|
2 x automatically variable sensitivity levels |
|
Devices consist of a transmitter/receiver and separate reflector |
|
5 to 70 Metre range (expandable to 100 Metres) |
| Ordering Codes |
| Cat No | Description |
| FPA-110 | Infra-Red Beam Smoke Detector (5-100m) |
| FPA-117 | Remote Test Station |
| FPA-193 | Surface Mount Accessory (required for surface wiring) |
| FPA-194 | Multi Mount Accessory for Ceiling or Wall Mounting * |
| FPA-195 | Heater Kit for the Beam Detector (for cold areas) |
| FPA-196 | Heater Kit for the Reflector (for cold areas) |
| FPA-197 | Long Range Kit (for distance over 70m) |
| FPA-201 | Infra-Red Beam Detector c/w Integral Test filter |
| * Also requires FPA-193 | |
| Dimensions | |
| 254mm x 190mm x 135mm | |
| Specification | |
| Weight: | 1.77Kg |
| Operating Voltage: | 15-32Vdc |
| Stand-By Current: | 2mA at 24Vdc |
| Max Alarm Current: | 38.5mA |
| Max Wire Gauge: | 2.5mm² |
| Reflector Size: | 200 x 230mm |
