Simple and Easy to Install Fire Alarm System Using Only a Pair of Wires

Our two-conventional fire alarm system is installed using only one pair of wires, eliminating the need for a dedicated sounder circuit.

The panel differentiates between a call point and detector alarm and can accommodate 32 devices per zone. The two-wire panel also features a fault monitoring display for each zone a one man walk test facility and zones are configured without the need to use resistors or capacitors on unused zones.

With the increasing number of new buildings and with greater pressure on environmental officers to actively enforce the requirements of BS5839 part 6 (The code of practice for fire detection and alarm systems in dwellings) organisations are constantly looking for a reliable early warning fire system without the disruption of nuisance alarms. To satisfy this ever increasing market, the two-wire plus system has been developed.

Both systems incorporate the multi-point detector, which offers 7 modes of detection and can be supplied with an integral 90dBA sounder. This greatly simplifies the installation as one device suits all applications.

Also available are user-friendly contractor kits, consisting of either a 2 zone or 4 zone panel, six multi-function devices, two call points and a detector/sounder head removal tool.
Features
Two-wire installation - Only one circuit per zone to connect detectors, call points and sounders, therefore reducing installation costs
Call point identification. The panel has the ability to differentiate between call point and detector alarms
System fully complies with BS5839 and EN54
Can support up to 32 devices per zone
72 hour standby
All panels have 1 auxiliary sounder circuit
Detector head contamination warning - Before going into false alarm, the panel will indicate which zone and device require a replacement optical chamber
Includes all system features plus:-
Programmable delay (1-5 minute)
Local sounder operates while detector alarm is confirmed
Full alarm when fire is confirmed
Immediate full alarm when fire is detected in communal areas
Eliminates the disruption of nuisance alarms
The perfect solution of BS5938 Part 6 (HMO's)
Ordering Codes
Cat No Description
FP-020 Duplex Two-Wire 2 Zone Conventional Fire Panel
FP-018 Duplex Two-Wire 4Zone Conventional Fire Panel
FP-019 Duplex Two-Wire 8 Zone Conventional Fire Panel
FP-021 Duplex Plus Two-Wire 2 Zone Conventional Fire Panel
FP-022 Duplex Plus Two-Wire 4 Zone Conventional Fire Panel
FP-023 Duplex Plus Two-Wire 8 Zone Conventional Fire Panel
FP-024 Duplex Two-Wire 2 Zone Contractor Kit
FP-025 Duplex Two-Wire 4 Zone Contractor Kit
FPA-1017 Duplex Two-Wire 8 Zone Contractor Kit
FPA-1019 Duplex Panel Keys and Barrel for 8 Zone Panel

Technical Information

Number of Zone Circuits:

 2 Zone, 4 Zone and 8 Zone
Auxiliary Sounder Circuit: One
Mains Supply Voltage: 230 Volts ac + 10%, 15% 50Hz
System Voltage: 24 Volts dc
System Indicators: Detector Alarm, Call Point Alarm & Fault
Maximum Zone Loading:: 32 Detectors, Unlimited Call Points
Required Batteries:* 2 x 12V 2.1Ah (8 Zone 2 x 12V 3.2Ah)
Dimensions (mm): 310 x 243 x 85 (8 Zone 315 x 400 x90)
Panel Construction: Fire Retardant Plastic (8 Zone Mild Steel)
Batteries to be ordered separately