| A Series of Devices to Compliment DUPLEX Two-Wire Systems |
 |
To compliment the Duplex range and to ensure the system is even more installer friendly, we supply the extensive series of two-wire devices. The call point is resetable and is available with a 90dBA integral sounder making it the ideal solution for manual systems. Our range of high output sounders have been developed to give the installer added flexibility. A combined sounder strobe is available providing both visual and audible indications. The two-wire fire output module can be situated anywhere on the zone circuit and is ideal for connecting to plant shutdown and door release mechanisms. The two-wire repeater panel uses key access and has silence, sound alarms and reset facilities. The repeater panel housing is manufactured from robust polycarbonate and is available in 8 or 16 zone variations. |
| Features | |
| Repeater Panel | |
 |
8
or 16 zone variations available |
|
Key access |
|
Silence, sound alarm and reset facilities |
|
Can replicate major user controls on the control panel |
Fire Output Module |
|
|
Normally closed fault loop for monitoring |
|
Can be situated anywhere on the zone circuit |
|
Mains and fault indicators |
|
Gives a single changeover relay to 30Vdc 0.5A |
Sounders/Strobes |
|
|
4 tones settings |
|
Anti-tamper feature |
|
Low current consumption |
|
Bayonet locking device |
Call
Points |
|
|
Fitted with a LED standard |
|
20mm entries as standard |
|
Resetable element |
| |
Can operate on most fire systems |
| Ordering Codes |
| Cat No | Description |
| FPA-1011 | Duplex Resetable Call Point |
| FPA-1012 | Duplex Resetable Call Point & 90dB Sounder |
| FPA-1029 | Duplex /Uni-Fire IP55 Resetable Call Point |
| FPA-1013 | Duplex Red 100dB Stand Alone Sounder |
| FPA-1014 | Duplex White 100dB Stand Alone Sounder |
| FPA-1024 | Duplex IP55 Square Stand Alone Sounder |
| FPA-1028 | Duplex /Uni-Fire Low Profile Sounder Beacon 95dBA |
| FPA-1015 | Duplex Output Module |
| FPR-003 | Duplex 8 Zone Repeater Panel |
| FPR-004 | Duplex 16 Zone Repeater Panel |
| FPA-1025 | Duplex/Uni-Fire 95dBA Square Sounder |
| FPA-1026 | Duplex/Uni-Fire IP55 95dBA Square Sounder |
| FPA-1027 | Duplex/Uni-Fire Surface Industrial Horn Sounder 96dBA |
| Specification |
Call
Points |
Sounders |
||
Voltage Range: |
18030V dc | Sounder: | 100dBA @1m |
| Operating Current: | Quiescent 105µA | Voltage: | 18-30Vdc |
| Call Point Alarm: | 25mA | Current Consumption: | 18mA |
| Sounder Alarm: | High 16mA Low 8mA | Sounder Patterns: | Uk 2 Tone, Slow Whoop, Din Tone, French Sound |
| Sounder Output: | High 85dbA Low 72dbA | ||
| Flush Dimensions: | 87mm x 87mm x25mm | ||
| Surface Dimensions: | 87mm x 87mm x53mm | ||
Fire
Output Module |
Repeater
Panel |
||
| Supply Voltage: | 18 to 30V dc | Supply Voltage: | 18-30V dc |
| Current Consumption: | Quiescent 450µA | Quiescent Current: | Power LED off = No Current, Power LED On = 10mA |
| Indicators: | Active & Fault 2mA | Supply Current: | 10mA
per Zone LED Illuminated, 10mA Total for the Two Fire LED's 10mA for the
fault LED, 10mA for the Buzzer |
| Supply Voltage (To Relay) : | Red = Active | Cable Requirement: | 1
Core per Zone & Common Fault, 2 Cores for Power (24V), 3 Cores if
using Control: EVAC, SIL, RST |
| Dimensions: | Yellow = Fault | Dimensions: | 310mm x 243mm x 85mm |
Sounders/Strobes |
|||
| Sounder: | 100dBA @1m | ||
| Sounder Voltage: | 18-30Vdc | ||
| Beacon Voltage: | 18-30V | ||
Current
Consumption: |
Average
26mA (At 24V dc)
|
||
Sounder
Patterns: |
UK2
Tone, Slow Whoop, Din Tone, French Sound
|
||
