| A Comprehensive Range of Break Glass Call Points to Suit Most Applications |
 |
Our surface or flush mounted break glass call points meet the requirements of EN54 part 11 and are certified to BS5839 part 2 by the Loss Prevention Certification Board. We produce a range of break glass call points in a variety of colours for installations with specific requirements. Please refer to our sales team for details.
|
| Features | |
 |
Normally open contacts with 470R series monitoring resistor |
|
A test key is supplied with each unit |
|
An unlimited number of call points can be connected to the panel |
|
A range of custom call points are available |
| Ordering Codes |
| Cat No | Description |
| FPA-006 | Surface Mounted Call Point |
| FPA-007 | Flush Mounted Call Point |
| FPA-034 | IP55 Surface Mounted Call Point |
| FPA-035 | IP65 Surface Mounted Call Point |
| FPA-036 | Replacement Glasses (Pack of 5) |
| FPA-059 | Resetable Flag Indicating Call Point |
| FPA-081 | Protective Cover |
| Suffix /WH for white, /BU for blue, /GN for green, /YE for yellow call points | |
| Dimensions | |
| FPA-006: 87mm x 87mm x 52mm | |
| FPA-007: 87mm x 87mm x 50mm | |
| FPA-034/035: 124mm x 124mm x 60mm | |
| Specification | |
| Max Contact Resistance: | 150 Milliohms |
| Max Contact Rating: | 3 Amps |
| Min Recommended Voltage: | 12V ac/dc |
| Resistor Wattage: | 1W (2.5W for IP65 Version) |
| Resistor Ohmic Value: | 470 Ohms |
| Operating Temp Range: | -30°C to 70V°C |
| Frequency: | 45/65Hz |
